| PART |
Description |
Maker |
| SD-44067-001 44067-1803 0440671803 |
3.00mm (.118) Pitch Micro-Fit 3.0 Wire-to-Board Header
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Wire-to-Board Header
3.00mm (.118") Pitch Micro-Fit 3.0垄芒 Wire-to-Board Header
|
Molex Electronics Ltd.
|
| 43650-0818 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| 44769-0803 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 44769-1603 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 43025-1408 0430251408 |
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Receptacle Housing, Dual Row, 14 Circuits
3.00mm (.118) Pitch Micro-Fit 3.0 Receptacle Housing, Dual Row, 14 Circuits
3.00mm (.118") Pitch Micro-Fit 3.0垄芒 Receptacle Housing, Dual Row, 14 Circuits
|
Molex Electronics Ltd.
|
| SD-43650-002 43650-0705 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Right Angle, with Press-fit Metal Retention
|
Molex Electronics Ltd.
|
| 44769-1201 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 2.54um
|
Molex Electronics Ltd.
|
| SD-44769-001 44769-1801 0447691801 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 2.54um
|
Molex Electronics Ltd.
|
| 44769-0402 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 0.38um
|
Molex Electronics Ltd.
|
| 43045-1817 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Vertical, with Press-fit Metal Retention Clip, 18 Circuits
|
Molex Electronics Ltd.
|
|
